Best-Ex Frames
Wood Post Mount:

The Post Mount Frame attaches to a customer-supplied treated wood post at either a 30 or 45 degree angle. this style is a durable and economical choice for any project.

Installation Assistance
Specifications

Wood Flush Mount:

The Flush Mount Frame attaches to a customer-supplied wood post and is perpendicular to the ground. Included with this frame is a “post protector” bracket. This bracket is placed between the frame and the post, held in place by the wood screws. The post protector covers the top of the wood post to protect it from weathering. Signs are easily installed by removing the top rail of the frame, inserting the sign, and replacing the top rail.

Installation Assistance
Specifications

Wall Mount:

The Wall Mount Frame is very similar to the Flush Mount Frame. The wood screws, which are provided, go through the countersunk holes in the back plate of the frame and into our mounting surface. The frame is slightly off-set from the mounting surface to accommodate uneven surfaces and to allow the removal of one edge of the frame for installation of the sign after the frame is mounted. Any side of the frame can be the removable edge, so you may want to consider the accessibility of installing your sign when ordering your frame.

Installation Assistance
Specifications

Upright Wood Post Mount Frame:

The Upright Frame can be mounted in several ways. They can be mounted as a single frame with a post on each side, a line of frames, or a cluster of frames. The frames attach to a customer supplied wood posts with lag screws (provided). With an additional bracket, you can have a cluster of 3, 5 or more frames. Special configurations may require additional brackets, so talk to us about your design. You can even use these frames back-to-back for a 2-sided exhibit (requires 6” posts). Signs are easily installed by removing the top rail of the frame, inserting the sign, and replacing the top rail.

Installation Assistance
Specifications

Rail Mount and Deck Mount:

The rail mount frame is our standard frame adapted to mount to various rail systems. The actual configuration of the rail mount depends entirely upon what type of railing you are mounting to. We can design a mount to work on most any railing whether it is round, square or wood. Call us with your specific requirements.

Installation Assistance
Specifications

Aluminum 2x4 Inch Post With Plate:

Our standard frame can be mounted to aluminum “Posts with Plates”. Posts with plates are 3” square or 2” x 4” rectangular aluminum tube with a welded plate which is attached directly to the aluminum back plate of the frame with standard hardware. The posts are finished to match the frame, and give a slightly more formal look to your exhibit. Frames can be mounted at either 30 or 45 degree angle.

Installation Assistance
Specifications

Boot Brush:

This exhibit was designed by The Nature Conservancy and the University of Wisconsin – Extension for the education and control of invasive garlic mustard plant. The BEST-EX standard frame for panel 18” h x 24” w is built to attach to (2) treated wood posts. A boot brush assembly attaches to the main posts, and holds (4) replaceable boot brushes. The sign panel is available from others – ask us for information. Replacement boot brushes are available on line – contact us for information. For additional information, see our Garlic Mustard Projects page. For more information about the Boot Brush contact BEST-EXhibits (800) 356-4882

Specifications

Products
Quote
Request
Gallery